85275100

KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey
Product data sheet
Technical Properties
Download
  • 85275100 KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey
    • 85275100 KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey
    KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey
    Art No. 85275100
    EAN No. 4011334376125
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    close all open all
    Architecture
    Bus system KNX
    Functions
    Bus module detachable no
    • ETS additional functions: +6 scenes, operating mode, 1 up/down button control, 2 x alarm, status display
    • ETS additional function: repeater function
    • reset function (to factory setting)
    • scene saving lockable
    • scene opening via KNX radio appliances
    • quicklink functions: blind, 2 scenes, forced control, up/down push-button
    Configuration
    • with 2 mechanically and electrically mutually-locked relay contacts
    Controls and indicators
    • with manual operation up/down
    • Activation, for example through switch, push-button, timer, blind timer switch
    • with configuration and function button
    Connectivity
    Bus system radio frequent no
    Bus system LON no
    Bus system Powernet no
    Radio protocol KNX Radio
    Receiver category 2
    • with 2 independent, mains supplied, binary inputs for potential-free contacts
    Main electrical features
    Frequency 50 Hz
    Electric current
    Input signal current 33 µA
    Frequency
    Radio reception frequency 868,3 MHz
    Power
    Radio transmission power < 10 mW
    Measurement
    Input scanning voltage per channel 5 V
    Relative humidity (without condensation) 0…65 % (without condensation)
    Materials
    Colour independent of design lines light grey
    Dimensions
    Dimensions (Ø x H) 53 x 27 mm
    Diameter 53 mm
    Height 27 mm
    LED control
    LED with configuration and function LEDs, with control LED (relay closed)
    Installation, mounting
    Installation mode for installation behind flush-mounted inserts
    Connection
    Conductor cross-section 0,75…2,5 mm²
    Connection with 2 independent battery-supplied binary inputs for potential-free contacts
    • with screw-in lift terminals
    • integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
    Cable
    Binary cable length, extendable to max. 5 m
    Binary cable length ≈ 20 cm
    Settings
    Lamella adjustment on signal duration < 1 s
    • toolless quicklink configuration using buttons and LED display
    Equipment
    Number of radio channels 2
    Number of quicklink links max. 20 transmitter/receiver
    Self-retaining for 2 min on signal length > 1 s
    Transmitter duty cycle 1 %
    Change-over time for change of direction < 0,6 s
    Standards
    General standards EN 50428, EN 60669-2-1, EN 300220-2, EN 301489-3, EN 50491-3
    Use conditions
    Operating temperature 0…45 °C
    • low intrinsic energy requirement
    Identification
    Application, usage KNX radio - actuators
    Product family product family: output
    Main design line Electronics platform
    Secondary design line(s) Berker.Net
  • Manuals & installation instructions
    Manual for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (DE-EN-IT, 2012-05)
    		 PDF, 171 KB
    Catalogue - Pages
    Blind actuators Order Overview for Blind actuators
    Blind actuators     		PDF, 407 KB
    Catalogue - Chapters
    Berker KNX - quicklink Catalogue Chapter for Berker KNX - quicklink
    Berker KNX - quicklink     		PDF, 3 MB
    KNX product database
    ETS Database for 85275100
    		 KNXPROD, 15 MB
    KNX Database (from ETS3) for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (V101)
    		 VD5, 17,9 MB
    KNX Database (from ETS4) for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (V101)
    		 KNXPROD, 15 MB
    ETS Database for 85275100
    		 VD5, 17,9 MB
    Application guides ETS
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    		 PDF, 1,8 MB
    More (10)
    Product data sheets
    KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey Product Data Sheet for 85275100
    KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey     		PDF, 437 KB
Customers who bought this item also bought (1)
85122200
85122200

Switch insert 2gang Electronics platform

* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.