-
Switch actuator/blind actuator 2/1gang easy + binary input 2gang flush-mounted 6 A with screw terminals, KNX, light grey Art No. 80342012 EAN No. 4011334417637 P.U. 1 part Price * on demand Price Group Bus system yes Number of blinds/shutters outputs 1 Fixing mode flush-mounting - for 1 phase operation
- with positioning function for blind and lamella position
- with safety functions e.g. for wind, rain, alarm
- for switching e.g. 2 independent loads or activation of a drive
Indicator lamp yes - test mode/building site mode can be activated via programming button
- manual operation in test mode via programming button (single-area operation)
- for activation of a drive for alternating current
- with illuminated programming button
Bus system radio frequent no Bus system LON no Bus system Powernet no Rated operational voltage Ue 230 V Rated current 6 A Max. switching capacity at 230 V AC Operating voltage over bus 21…32 V DC System supply voltage 30V DC via bus Bus current consumption (data transfer) 7 mA Bus current consumption (idle) 5 mA Maximum switching current 6 A Maximum through current 6 A Rated current 6 A Switching current at cos φ = 0.8 max. 6 A Withstand current in AC1 for the contact path or zone 1 6 A Max. power with electronic transfo. 500 W Total power loss under IN 0,5 W Output power 500 W Conventional transformers 500 VA Electronic transformers 500 W C-load no Input scanning voltage 12 V DC V DC Colour light grey Height of installed product 44 mm Dimensions (LLxwwxhh) 44 x 43 x 22 mm Height 44 mm Fluorescent lamps with electronical ballast (EB) 6 x 48 W - uncompensated 500 VA Energy-saving lamps 5 x 13 W Power lighting fluo lamps 5 x 13W Max. power fluo. duo lamp comp. series 6 x 48W Max number of LED/CFL lamps 5 230V LED lamps 5 x 13 W Power LED 65 W Max. power with incandescent lamps 500 W 230 V incandescent lamps and halogen lamps 500 W Connection cross-sect. flexible conductor 0,75 / 2,5mm² Connection cross-sect. rigid cable 0,75 / 2.5mm² Conductor cross-section (flexible) 0,75…2,5 mm² Conductor cross-section (rigid) 0,75…2,5 mm² Number of contacts 2 Type of contacts 2NO Type of connection with screw - with integral bus coupling unit
- with screw terminals
- bus connection via pre-assembled cable with bus connection terminal
Supported configuration modes easy, system - Switching time on change of direction is preset
Bus connection included yes Number of outputs 2 Modular expandability no Different phases connectable no With slide for manual switch yes Differentiation characteristic 3 - Sales with screw terminals Protection index IP IP20 Operating temperature -5…45 °C Storage/transport temperature -20…70 °C Device family TXB Main design line KNX -
-
Instruction manuals for 80342012
PDF
Order Overview for KNX actuators easy
KNX actuators easyPDF, 593 KB 
Catalogue Chapter for Berker KNX - easy
Berker KNX - easyPDF, 2,8 MB 
ETS Database for 80342012
KNXPROD, 289 KB
Product Data Sheet for 80342012
Switch actuator/blind actuator 2/1gang easy + binary input 2gang flush-mounted 6 A with screw terminals, KNX, light greyPDF, 378 KB -
Art No. Description P.U. 
80010000 KNX Configuration server easy link RMD KNX, light grey 1 prt. -
Art No. Description P.U.
80010000 KNX Configuration server easy link RMD KNX, light grey 1 prt.
* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.